Device Interfaces.

Device Interfaces
	Data Interfaces performs the following functions: 1. Connects to a single frequency (CAP LLS-F) or more digital sensors (CAP LLS-D D485). 2. Summarizes the testimony of several level sensors (only CAP LLS-D D485 with protocol MODBUS). 3. Signal is produced management arrow staffing indicator (an imitation of a full level sensor, the resistance of 5-90 Ohm, 5-350 Ohm, 150-800 ohms). 4. Generates an analog signal proportional to the level of fuel, with a given maximum value (eg 12 volts). This function is useful for connecting to the terminals, with analog input 0-30 or 0-12 volts. Has a durable aluminum body reliably protected from interference.
Number of inputs – 3: Input 1 – the equivalent resistance (0-90, 5 - 350, 50 - 900 ohms). To select a range of software is carried out through the RS-485; Input 2 – reserve fuel. Type - open collector; Inpu t3 – analog signal.. Type of analog signal can be: а) Voltage – 0В … 4.5V; б) Voltage – 0V … 12V. Number of inputs – 5: Input 1 – interface RS485; Input 2 – dry contact input frequency 500 - 1500Hz; Input 3 – dry contact, reset to factory settings. Voltage – 9 … 30В. Device Interfaces signals about its technical condition, with red and green LEDs; Devise interfaces provides the LLS connection or a CAP LLS-F to the entrance of 3 or more (maximum 2) CAP LLS-D D485 to gate 1 (joint CAP LLS-F and CAP LLS-D D485 is not supported). An example of connecting the interface to CAP LLS-F: An example of connecting devices to the conjugation CAP LLS-D D485: