Satellite & Fuel Monitoring system developer and hardware manufacture
|
Installation kits for fuel flow sensors & meters
Function
Installation kits are designed for connection of fuel flow sensors and fuel flow meters to the fuel system of the engine using fuel pipe d=8 mm.
Advantages
1. Nipples, valves, angle piece bolts have holes for sealing; 2. High-quality components: - seal rings (D18-055F) and seal washers (08 Cu) are made from high-quality soft copper (not aluminium!!!), - angle pieces are made from steel (not aluminium!!!), - check valve is pressure proved, - installation kit components have protection from corrosion. We would like to stress that the quality of installation and sensors operation depend on components!!!
|
|
Installation kits include
The manufacturer reserves the right to induce amendments to the delivery set, as well as replace components with similar ones without prior notification of the customer.
|
Picture |
Designation |
Name |
Description |
KitNo 2 |
KitNo 9 |
KitNo 10 |
 |
Bolt 026 |
Angle piece bolt |
It is designed for fuel line connection with the units of the fuel system - high pressure fuel pump and final filter. |
3 pcs |
2 pcs |
3 pcs |
|
|
Bolt 027 |
Angle piece bolt |
It is designed for connection of two branches of the the fuel line with the units of the fuel system - high pressure fuel pump and final filter. |
1 pc |
1 pc |
- |
|
|
Bolt M8х16 |
Bolt |
It is designed for fastening the sensor/meter to the bracket. |
4 pcs |
4 pcs |
4pcs |
|
|
Nut М8 |
Nut |
It is designed for fastening the sensor/meter to the bracket. |
4 pcs |
4 pcs |
4 pcs |
|
|
Washer 8 |
Washer |
It is designed for fastening the sensor/meter to the bracket. |
4 pcs |
4 pcs |
4 pcs |
|
|
Washer 8.65 G |
Lock washer |
It is designed for fastening the sensor/meter to the bracket. |
4 pcs |
4 pcs |
4 pcs |
|
|
Washer CU D-18 |
Seal washer (copper) |
It is designed for sealing conjunctions between the components. |
16 pcs |
14 pcs |
11 pcs |
|
|
Washer CU 2026 |
Seal washer (copper) |
It is designed for sealing conjunctions between the components on the final filter. |
1 pc |
- |
1 pc |
|
|
Seal |
Plastic seal |
It is designed for fuel pipes sealing. |
8 pcs |
6 pcs |
6 pcs |
|
|
K1 |
Check valve |
It is designed for decreasing hydraulic shocks influence on sensors measuring accuracy (white valve). 0,35-0,5 Atm |
1 pc |
1 pc |
1 pc |
|
|
K2 |
Bypass valve |
It is designed for discharging excess pressure in the fuel system on the output of of the boost pump. |
1 pc |
- |
- |
 |
TR 8 |
Angle piece |
It is designed for connection of fuel pipes with the components. |
8 pcs |
6 pcs |
4 pcs |
|
|
GB-612 |
Fuel filter |
It is designed for installation behind the final filter before the DPT sensor. |
1 pc |
- |
- |
|
|
Connection clips 008 |
Connection clips |
It is designed for fixation of fuel pipes on the angle piece or filter GB-612. |
10 pcs |
6 pcs |
4 pcs |
|
|
Nipple 012 |
Reducer-nipple duplex |
It is designed for connection of the fuel line with the return line via the bypass valve. |
1 pc |
1 pc |
- |
|
|
Nipple 015 |
Reducer-nipple single |
It is designed for bending the return line from the final filter via the bypass valve. |
1 pc |
- |
1 pc |
|
|
Nipple 016 |
Reducer-nipple single |
It is designed for connection of the fuel line with the starting heater. |
1 pc |
- |
- |
|
|
Nipple 016-01 |
Reducer-nipple duplex |
It is designed for connection of two branches of the fuel line with the strating heater. |
1 pc |
- |
- |
 |
Plug |
Threaded plug |
It is designed for plugging the return line from the high pressure fuel pump. |
1 pc |
1 pc |
1 pc |
